Metal Ball Valves

 

Metal Ball Valves

 

3 pcs Design Ball Valves

  • 3 pcs design full bore ball valve
  • Manually operated by lever (with locking device) or can be retrofitted with pneumatic or electric actuator for automated process application
  • Blow out proof stem with self-compensating stem seal design
  • Body, ball and stem material in SS316 stainless steel (SS304 on request) with PTFE/FPM seat and seal. Special high temperature high pressure seat on request
  • Nominal size from DN15 to DN100mm
  • Operating pressure up to PN63 (1000 WOG)
  • Connection available in BSP, NPT, Butt weld, Socket weld
  • Option available include anti-static, fire proof, cavity filled seat, oil and grease free version

3 pcs Design Ball Valve Catalogue


Flanged Ball Valves

  • 2 pcs design full bore flanged ends ball valve
  • Manually operated by lever (with locking device) or can be retrofitted with pneumatic or electric actuator for automated process application
  • Blow out proof stem with self-compensating stem seal design
  • Body, ball and stem material in SS316 stainless steel (SS304 on request) with PTFE/FPM seat and seal. Special high temperature high pressure seat on request
  • Nominal size from DN15 to DN150mm
  • Operating pressure in accordance to flange rating
  • Flange connection standard available in ANSI, DIN and JIS standard
  • Option available include anti-static, fire proof, cavity filled seat, oil and grease free version

2 pcs Design Ball Valves

  • 2 pcs design full bore threaded ends ball valve
  • Manually operated by lever (with locking device) or can be retrofitted with pneumatic or electric actuator for automated process application
  • Blow out proof stem with self-compensating stem seal design
  • Body, ball and stem material in SS316 stainless steel (SS304 on request) with PTFE/FPM seat and seal.
  • Nominal size from DN15 to DN100mm
  • Operating pressure up to PN100
  • Connection available in BSP or NPT thread
  • Option available include oil and grease free version

3 Way Ball Valves

  • 4 pcs design reduced bore 3/2 way ends ball valve (5 pcs design full bore type on request)
  • Manually operated by lever (with locking device) or can be retrofitted with pneumatic or electric actuator for automated process application
  • Blow out proof stem with self-compensating stem seal design
  • Body, ball and stem material in SS316 stainless steel (SS304 on request) with PTFE/FPM seat and seal. Special high temperature high pressure seat on request
  • Nominal size from DN15 to DN50mm (larger size on request)
  • Operating pressure up to PN63 (1000 WOG)
  • Connection available in BSP or NPT (flanged ends version on request)

Special Design Ball Valves (example Tank Bottom, Cryogenic, V Port, Cavity Filled)

  • 3 pcs body V port design ball valve for modulating control application
  • Cryogenic version for low temperature application
  • Tank Bottom Valve for direct installation to base of tank
  • High pressure (up to 4,000 psi) version
  • Cavity filled seat version for low dead volume requirement
  • Tri-clamp version for sanitary connection
  • Internal and/or external polish version
  • Version without ISO mounting pad
  • Low cost 1 pc body reduced bore version
  • Manual operated version retrofitted with limit switch box
  • Complete fully assembled and tested valve system